Xenarc 706TSA, Руководство по установке

Страница: 18 / 19

NOTE
NOTE 1:
If you are trying to connect the monitor to a laptop computer, please make sure to
enable the 15-Pin D-SUB external monitor output located at the back of your laptop
computer. Some laptop computers have three modes: Laptop Display Only, Laptop
Display plus External Monitor, and External Monitor Only. If this is the case, please
switch to the External Monitor Only mode.
NOTE 2:
Touch Screen device driver must be installed onto your computer in order for the
Touch Screen to become functional. Uses Resistive Touch Screen panels in the
706TSA monitor. Touch Screen drivers and software for different operating
systems can be found in the included CD-ROM disc. You can refer to this manual
for a walkthrough of Touch Screen Driver installation under Microsoft Windows XP.
NOTE 3:
The maximum voltage supported by the monitor is 24V DC . Feeding the monitor
with higher voltage will damage the monitor and void the warranty. Please use a
fused power source if you decide to wire the monitor directly to your car’s electrical
system. It is also crucial that you check the polarity of the connection.
NOTE 4:
If the monitor is not displaying the VGA signal properly, the VGA signal might be out
of range. Please try changing your display refresh rate to 60, 70, 72, or 75Hertz.
NOTE 5:
Please note that the LCD screen is made with high-precision technology. However,
black points or bright points of light (red, blue, or green) may appear constantly on
the LCD screen, and irregular colored stripes or brightness may appear on the LCD
screen. This is not malfunction. (Effective dots: more than 99.999%)
For Technical Support, please contact us at:
18
|
Additional Info.