8.
Click
Next
to accept the Program Folder default, shown below. Files will
then start to be copied to your computer.
9.
Setup will finish installing and tell you that The Touchkit driver has been
installed. Now plug the USB connector from your monitor into your
computer. Click
YES
to perform 4-points calibration when asked to.
Follow the instruction to touch, hold, and then release each of the four
blinking X to complete 4-points calibration.
10.
Your Touchscreen is now ready to use. You can click on the icon
Touchkit
located on your desktop to launch the Touchscreen program for various
settings and adjustments.
1020YV VGA LCD Monitor
1020TSV VGA LCD Monitor w/ Touch Screen
Owner’s Records
The model and serial numbers are located on the rear of the unit. Please record these
numbers in the spaces provided below, as well as the dealer name, address, and
telephone number. Please refer to these records whenever speaking to your dealer
regarding this product.
Model # _______________________ Serial # ______________________
Dealer Name _________________________________________________
Street Address ________________________________________________
City ___________________ State _______________ Zip ____________
Phone # ( ) _________________Purchase Date ____/____/____
www.xenarc.com
