36
/
56
4.3.3
Manage
data
in
buffer
There are two major types of buffer, Fuse Buffer and Data Buffer (HEX/ASCII buffer).
In following section, the operations of these two types of buffer is described and a
typical buffer operation window is shown below.
4.3.3.1
HEX/ASCII
Data
Buffer
•
Locate
. Enter the address of the data you wish to display and select OK to
quickly move the cursor to the desired location.
•
Fill
. To fill the data in the buffer between the
Start
and
End
address. For Fuse
buffer, the data must be 0 or 1, and for Data Buffer (HEX/ASCII buffer)
•
Copy
. Select
Copy
to open the Copy Buffer dialog box.
o
Enter the start address in the Start Address field.
o
Enter the end address in the End Address field.
o
Select
OK
to copy the data between the start address and the end
address, beginning with a new address. Otherwise, select
Cancel
.
