29
/
56
•
Normal
to load the whole file
•
Even
to load the first byte and discard the second byte out of every
two bytes
•
Odd
to discard the first byte and load the second byte out of every
two bytes
•
1st
byte
of
4
to load first byte and discard the other three bytes out of
every four bytes
•
2nd
byte
of
4
to load the second byte and discard the other three bytes
out of every four bytes
•
3rd
byte
of
4
to load the third byte and discard the other three bytes
out of every four bytes
•
4th
byte
of
4
to load the fourth byte and discard the other three bytes
out of every four bytes
•
1st
2_byte
of
4
to load the first two bytes and discard the other two
bytes out of every four bytes
•
2nd
2_byte
of
4
to load the last two bytes and discard the other two
bytes out of every four bytes
5.
Buffer
Address
. To indicate a different initial address of the data being
loaded into the buffer.
6.
File
Address
. In case the file type has a non-zero start address, enter the data
offset address in the
File
Address
field. Make sure to enter the correct
address, because an incorrect file offset address causes part of the buffer to be
filled with FF (or incorrect data).
7.
Buffer
clear
on
data
load
. Tick this checkbox will enable the user to fill the
data buffers with the specified data.
NOTE
: Ticking the checkbox of Custom File will disable most loading option.
