background image

EWV

- 21 -

TECHNICAL INFORMATION

ELECTROFOG

2.3 

INTENDED USE

The machine is intended exclusively for use in 

combination with Xeda products for the treatment of fruit 

and vegetables in cold rooms, silos or for the disinfection 

of premises.

ATTENTION

Refer to Annex 1 to identify the list of products 

that can be used with the machine.

DANGER

It is strictly forbidden to use the machine with 

aerosol products other than those permitted by 

Cedax.

DANGER

It is forbidden to carry out work for which the 

machine has not been designed; this would result 

in improper use of the machine, with relative 

consequences.

Conformity and strict compliance with the conditions of 

use,  maintenance  and  repair  specified  in  this  manual 

are an essential component of the intended use.

The use, maintenance and repairs of the machine 

must be carried out by suitably trained personnel with 

recognised skills in the specific sector.

All accident prevention standards and generally 

recognised occupational health and safety standards 

must be observed. 

WARNING

It  is  forbidden  to  make  modifications  or  carry 

out interventions of any kind on the machine, 

excluding those related to normal maintenance. 

Any  modification  made  to  the  machine,  not 

carried by the Manufacturer or Authorised Service 

Centres, automatically invalidates the Conformity 

of the machine with the applicable European 

Directives.

2.4 

IMPROPER USE

Improper use means use of the machine according to 

work criteria that do not comply with the instructions 

contained in this manual and that, in any case, pose a 

risk to the operator and for the other workers involved.

Do not use the machine to treat any materials other than 

those allowed and with unauthorised methods of use.

It is forbidden to use the machine:

•  in  a  construction  configuration  other  than  that 

envisaged by the Manufacturer;

•  with fixed guards tampered with or removed;

•  in places at risk of explosion and/or fire;

•  integrated with other systems and/or equipment not 

considered by the Manufacturer in the official layout;

•  connected to energy sources other than those 

envisaged by the Manufacturer;

•  for operations other than those described in the 

paragraph “Intended use”;

•  when empty, without the product to be atomised;

•  for the treatment of products other than fruit and 

vegetables;

•  outside the cold rooms and silos;

•  with different product types, even if among those 

allowed.

DANGER

Improper use of the machine is highly dangerous. 

The Manufacturer declines all responsibility for 

any harm to persons and/or property resulting 

from improper use of the machine. In addition, 

the conformity of the machine with the European 

Directives and any form of guarantee automatically 

shall lapse. 

Содержание CEDAX ELECTROFOG EWV8





















































































Отзывы: