DO NOT RETURN TO RETAILER WHERE YOU PURCHASED AT.
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or [email protected]
32
STEP 12 - Slide assembly (continued)
Attach X6 to X1-N2 and X2-N2. The inner sides of both X2-N2 and X1-N2, where
X6 (slide ladder steps) is attached to, are with concave holes.
Secure each side using Z1, Z6 and Z4.
Attach X3-N to X1-N2 and X2-N2.
Align holes and hold in position.
NOTE:
1. Do not over-tighten the nuts and bolts at every step.
2. Do not snap in the cover of plastic cap until you have finished the assembly of
each step and went back to tighten all of the nuts and bolts.
Front side
X3-N
Z4
Z1
Z4
X2-N2
Z6
Z6
Z6
Z6
Narrow side (Direction
as shown below)
Wide side faces the front
direction of the slide
X1-N2
X3-N
X6
Z1
