11 Central Weight Pocket 3/3
5.
Adjust the metal adaptor plate to the desired height for the central weight pocket, remember to attach
the backing screw. The backing screw should be on the same side as the logo on the upper harness
node.
6.
Place the central weight pocket on the harness in the same way in which it was mounted before. The
central harness strap should run under the straps at the bottom of the pocket;
7.
Move the central strap through the tri-glide integrated with the lower node and remember to adjust
the harness to your height, and next secure the loose end of the strap with the stopper in the same
way as seen in point 2;
8.
Screw the central weight pocket to the adaptor plate.
For people of short statue, after moving the central weight pocket downwards, the lower end of the weight
pocket may end below the lower harness node. In such a case the crotch strap needs to be passed through the
straps at the bottom of the pocket.
Fig.14. Adjustment of the central weight pocket – step 5
