Installation ways
Connection of external water pipes
DMT pipe
Operation instruction
Note:
If remote controller can not use at begin, please pair the remote controller as below instruction.
Pair method: Keep press rotary knob for 5 seconds till heard "Beep" sound, and screen start
flashing, then press any button on the remote controller, heard "Beep" sound and screen stop
flashing, pair succeed.
NOTE !
PAGE 09
PAGE 08
S8L
(Panel Control)
V90L
(Remote Control)
Close the water supply
valve and cut off the water
1.Close the water supply valve.
2.Connect the three-way valve to the water tubing under the toilet tank.
3.Connect the smallest end of the three-way valve with DMT pipe.
4.Connect the other end of the DMT pipe with the inlet hole of the bidet.
5.Open the water supply valve to supply water.
6.Check to ensure no water leakage at all connections.
--When testing the smart toilet bidet for the first
time after installation, please make sure to open
the water supply valve first and then power it on.
--If the blue light keeps flashing, please unplug
the plug for 30 seconds, turn on the water source,
and then connect the power to restore normal
operation.
