20
XciteRC 3i FHSS Hobby-Spec 2.4 GHz
EN
Repairs
·
Specifications
Flash
Racers-Tip:
When using a electronic speed control, please set the throttle trim to neutral and make
adjustments to the speed control. On a gas powered model, set the trim to neutral and adjust the linkage to
the point where carburetor is fully closed in accordance with the engine instruction manual. Trim Operation
and Travel Trim adjustments will effect the overall servo travel, so please check the (back-ward) move-
ment after the adjustment. When trim movement is goes to extremes: That means if you make a lot of the
trim movement to get the servo to the neutral position, please recenter the servo horn closer to the neutral
position and inspect your throttle linkage.
Repairs, Spare parts
Normal wear and defective parts that result from an accident, are excluded from the warranty. These include
in particular:
for car models:
bald tires, worn parts and drive gears, or bent / broken suspension, chassis or bodywork
ship models:
damaged or broken propellers, torn superstructure
airplanes:
damage due to improper transport or crash
If you find a part that is defective in material or workmanship right after opening the package, return - before
you used it – to your dealer or directly to us and we will send you a replacement.
In case of problems or questions, please contact your dealer or:
XciteRC Modellbau GmbH & Co. KG - Service, Autenbachstrasse 12, D-73035 Göppingen, Phone +49 7161
40 799 50
Email: [email protected]
Specifications
Transmitter
Receiver
Frequency
2.4 GHz FHSS
2.4 GHz FHSS
Channels
3, of which 1 control channel
3
Operating voltage
8,7 - 12 V DC
4.0 - 8.5 V DC
Current drain
approx. 100 mA
approx. 50 mA
Temperature range
0 - 70° C
0 - 70° C
Antenna lenght
55 mm
170 mm
Weight (without batteries)
approx. 370 g
approx. 6 g
