XciteRC X-PERT X90T, Руководство пользователя

Страница: 24 / 52

24 X-pert Charger X90T
EN
Connecting the battery
USER SETUP (5/5)
PB DCHG Cut 1.50V
NiMH DCHG Cut 1.00V
NiCD DCHG Cut 0.80V
LiIo CHG Cut 4.10V
LiIo DCHG Cut 3.10V
BACK
NEXT
:
:
:
:
:
USER SETUP (4/5)
LiPo CHG Cut 4.20V
LiPo DCHG Cut 3.20V
LiFe CHG Cut 3.60V
LiFe DCHG Cut 2.00V
PB CHG Cut 2.40V
BACK
NEXT
:
:
:
:
:
USER SETUP (3/5)
Nixx Cycle Mode C->D
Nixx Cycle Cnt 2 T
Cycle Wastertime 5Min
NiMH DeltaV 7mv
NiCd DeltaV 10mv
BACK
NEXT
:
:
:
:
:
USER SETUP (2/5)
Input Cut 10.0V
Safety Timer 240min
Int.Cut-Off 80
℃
Temp.Cut-Off 60
℃
Max Out CAPA 10.1AH
BACK
NEXT
:
:
:
:
:
USER SETUP (1/5)
Back Light 80%
LCD Contrast 40
Button Sound ON
Buzzer Sound ON
Max Out Watt 80W
BACK
NEXT
:
:
:
:
:
Parameter
LED Background light
LCD Contrast
Button sound
Buzzer sound
Max. Output power
20 - 80%
30 - 60
on / off
on / off
80 - 80 W
Input low voltage cut-off
Safety timer
Internal cut-off temperature
Battery cut-off temperature
Max. capacity
10.0 - 18.0 V
10 - 600 min.
50 - 80°C
50 - 80°C
500 mAh - 50 Ah
NiXX Cycle mode
Cycle count
Pause between the cycles
NiMH ∆ P
NiCd ∆ P
C (charge) -> D (discharge) / D -> C
1 - 5 Mal
5 - 60 Min.
5 - 25 mV
5 - 20 mV
LiPo end-of-charge voltage
LiPo end-of-discharge voltage
LiFe end-of-charge voltage
LiFe end-of-discharge voltage
Pb end-of-charge voltage
4.00 - 4.25 V
3.00 - 4.00 V
3.50 - 3.70 V
1.80 - 3.30 V
2.00 - 2.50 V
Pb end-of-discharge voltage
NiMH end-of-discharge voltage
NiCd end-of-discharge voltage
LiIo end-of-charge voltage
LiIo end-of-discharge voltage
1.20 - 2.00 V
0.80 - 1.50 V
0.50 - 1.50 V
4.00 - 4.15 V
3.00 - 3.90 V
increase value
decrease value
save and back
Connecting the battery
NiMH or lead acid batteries (Pb): first plug the charging cable into the 4 mm sockets on the side of the
charger. Now connect the battery.
Lithium batteries: Connect the Balancer adapter to the charger - the socket is polarized, pay attention
to the side guides. Then connect the charging cable to the 4 mm sockets on the side of the charger. Now
connect the battery to the balancer adapter and charging cable.
• WARNING: Use only batteries with XH balancer plugs. Never try to connect other plug types with
the charger! The plug or charger may damage or worse, the battery catches fire or explodes! If
necessary, use a suitable adapter cable.
• WARNING: The socket is polarized. The balancer plug must fit easily, do not use force! The plug
could be damaged or worse, the battery catches fire or explodes!
• WARNING: Before charging make sure check the type of the battery. Lithium batteries with more
than one cell must always be charged with attached Balancer in
Mode BCHG
-
fire hazard!
• Note: 1S lithium batteries have no extra balancer connector!