
29
XciteRC Flybar 190
EN
Troubleshooting
Troubleshooting
Problem
Possible Cause
Corrective Action
Receiver status
LED flashes conti-
nously
Unable to bind receiver
Repeat the Binding process, see chapter
BINDING
No response
after battery is
connected to the
helicopter
Transmitter switched off
Transmitter batteries low voltage
Poor contact on transmitter battery
terminals
Switch transmitter ON
Replace transmitter batteries
Check battery terminals
Motor does not
respond to throttle,
receiver LED
flashes
Helicopter battery low voltage
Charge battery or replace with a fully char-
ged
Main rotor spins
after landing
Throttle trim accidentally increased du-
ring flight
Check throttle trim and set to neutral
Servo moves, but
motor fails
Throttle trim too high, safety function
active
Throttle was not all the way down du-
ring power up
Loose motor connection or damaged
motor
Check throttle trim and set to neutral
Move the throttle stick all the way down
Check motor connectors or replace the
motor
Main rotor spins,
but the helicopter
is unable to take
off
Deformed or broken main blades
Helicopter battery low voltage
Check and/or replace main blades
Charge battery or replace with a fully char-
ged
Strong vibrations
Deformed or broken main blades
Bent main shaft
Deformed or broken rear blades
Main blade greps overtigthening
Check and/or replace main blades
Replace main shaft
Check and/or replace rear blades
Check screws and re-tight with suitable
force
Содержание Flybar 190
Страница 17: ...17 XciteRC Flybar 190 DE ...