XciteRC 15003600, Руководство пользователя

Страница: 27 / 52

27
XciteRC Runner 250
EN
LED‘S and their meaning
LED’s and their meaning
In the tailpiece there are placed two LED’s to control the GPS-status (green), Magnetometer (yellow) and the
calibration display (red). More of them are below the Quadrocopter pipes to display the flight attitude and the
battery condition.
green LED (rear)
red LED (front)
GPS signal (green LED)
Indicator light for Binding, motor lock/
unlock (red LED)
Magnetometer calibration (yellow)
Tail-LED’s:
red green yellow Function
blinks slowly Calibration is performed/motors locked
on Calibration is performed/motors unlocked
blinks GPS-search or less than 6 satellites receivable
on GPS: more than 6 satellites/GPS ok
blinks blinks Calibration needed
WARNING: If the green LED blinks, all GPS-supported modes (Position-Hold, Altitude-Hold and Coming-
Home) mustn’t be used for the model receives no sufficient GPS-signal and is unable to determine its positi-
on –
danger of falling! Also without function is the Failsafe Coming-Home!
Quadrocopter pipes-LED‘s:
red = front green = tail
on on Normal operation
blinks blinks Battery warning
Battery warning: If the LED’s do blink and simultaneously an acoustic warning signal is to be heard the
model is to land instantly – danger of falling!
Regard: If the battery voltage drops to 10.2 – 10.4 V, the LED’s will slowly start to blink. From this moment on