148187
7 Do not disassemble or modify the cell.
8 Do not transport or store the cell together with metal objects such as necklaces, hairpins, coins, etc.
9 Make sure the cell is not with conspicuous damage or deformation.
10 Don’t connect the cell to an electrical outlet directly.
11 If the cell leaks and the electrolyte splashes into the eyes, rinse the eyes with clean running water immediately for at least 15 minutes,
and go to hospital for treatment if necessary.
12 Mixed use of cells of different types is not allowed.
13 Keep the cell away from babies.
14 Do not directly solder the cell and pierce the cell with a nail or other sharp object.
15 Do not strike, throw or trample the cell.
16 Use the cell charger specifi cally for that purpose when charging.
17 Please separate cells of different electrochemical systems from one another when disposing of secondary cells.
18 Clean the terminals with a dry cloth before use if the cell terminals are dirty. Otherwise power failure or charge failure may occur due
to the poor connection with the instrument.
19 Cells should be removed from the device or charger immediately and not used again if they are over heat, give off odor, discolor or de-
form, or appear abnormally in any way during use, charging and storage.
20 The cell replacement shall be done only by either cell supplier or device supplier instead of the user.
21 Please tape the terminals to insulate cells before discarding them in case of fi re and explosion.
22 Do not use cells in strong electrostatic and magnetic occasions, otherwise, it can cause safety problems easily.
23 Use of damaged cells is not permitted.
24 Make sure package designing will not cause cell damages.
25 Cell packing should be conducted strictly according to level range, any misuse of different levels should not be permitted.
26 Disassembling cells from pack or module is not permitted unless under the guidance of professional technicians.
11 Restriction of hazardous substances
This model of lithium-ion cell is in accordance with our company’s request of „The hazardous substances and material management stan-
dard“ or customer’s requirements.
12 Contact information
Steinfurt
Any questions?
Contact us, we will be pleased to advise you.
All rights reserved. Preliminary data sheet. Although we have taken gre-
at care in preparing this document, energy inside GmbH does not accept
any responsibility for errors or omissions. All information included here
may be changed at any time without prior notifi cation.
energy inside GmbH, Ludwig-Elsbett-Straße 8, 97616 Salz - Germany
Tel.+49 (0)9771 6288-0, Fax +49 (0)9771 6288-22
[email protected], www.batterien-vertrieb.de
www.energyinside.de
