8
Concrete Floor Installation Instructions (At Job Site)
1. Use included Flange to drill holes on concrete floor. Hammer in anchor bolts to secure Flange.
2
.
Attach brackets to one side of the post, starting from the top
Make sure post is cut to 5’ long and insert/secure onto Flange with tek screws
Measure 5-3/8” for top bracket, then 1-7/8” for middle bracket, then 41-7/8” for bottom bracket
3. Insert top rail into the bracket. Slide bracket onto opposite side of the rail
(Repeat steps for middle and bottom rails)
4. Secure brackets with tek screws
5. Insert pickets through the rails, and make sure pickets are secured into rails
6. Installation is now complete
1.Use included Flange to drill holes
on concrete floor. Drill bit is 15/32”
in size. Hammer in anchor bolts to
secure Flange in place. (Use 3/8” bit
and drill slightly larger)
2.Attach brackets to one side of the
post, starting from the top.
Measure 5-3/8” for top bracket,
then 1-7/8” for middle bracket, then
41-7/8” for bottom bracket.
3.Insert top rail to already installed
bracket, slide bracket onto rail for
bracket installation on opposite
side. Repeat for middle and bottom
rails
4.Secure Rails to Bracket with tek
screws provided.
5.Slide pickets into rail holes
starting from left to right
6.Fence panel installation is
complete
