5
Layout Installation
Using the image as a guide, establish your fence line by staking out the areas you wish to enclose.
Mark every 6.5’ section to identify location of the posts.
NOTE:
If you are left with a space less than a full size panel, the rails can be cut down to fit the space by
using a hacksaw.
Attach string to each stake
NOTE
: Make sure all posts are set to have an opening
of 76-1/2” wide.
Be sure all posts are leveled.
Prior to fence panel installation, make sure concrete is
set and dry to avoid shifting of the posts.
Sketch out your fence plan to paper.
Show the house, driveway, deck, and
property lines in your diagram to
estimate materials and location of your
fence.
Measure accurately with tape measure
and identify those on your sketch.
Fence Panel