XCAT Basic
Manual XCAT Basic
Page 12
Edition: 05/2023
2.2
Assembly and disassembly of the XCAT Basic boat
Build up XCAT Basic
1)
Insert the front crossbeam
(without motor bracket)
into the front flanges of
the two hulls. The center
pin must point toward the
center of the boat. The
clamping levers must be
open.
Info: To prevent the hulls
from tipping over, you can
place the hulls in the
launching cradles/trolley
(both available as
accessories) during
assembly and disassembly.
2)
Place the rear crossbar in
the rear area of the XCAT
so that it is ready to
hand.
3)
Push the center beam
with the reinforced end in
the direction of travel
onto the front crossbeam.
Do not release the center
beam.
reinforced end
Содержание Basic
Страница 2: ......
