Feature Description
40
XBLUE Networks
3
Nig
ht
Service
Night
ȱ
Service
The
X-50
VoIP Telephone System can operate in two modes; day service and night service. Night service can be
used to change the extension Class of Service as well as the system ring scheme and Auto Attendant message.
Each extension is assigned a day and a night class of service, which can be used to specify day and night dialing
privileges. Thus, controlling the amount of unauthorized calls placed at night.
Numbering
ȱ
Plan
See Flexible Numbering Plan
Off
ȱ
Hook
ȱ
Preference
Similar to Automatic Line Select and Hot Line, The analog (SLT) telephone and
X2020
extension users have the
ability to select how their telephone will react when they lift the handset or press the speaker button. For
example, the telephone can access a specific telephone line, line group, dial a specific or group of extensions, and
even dial an outside telephone number.
Outside
ȱ
Calls
Once authenticated, an
X2020
telephone can dial a telephone number without going off hook, pressing the
speaker button, or accessing a telephone line. In addition, the user can press the softkey under “Backsp” to
delete a number if it is dialed incorrectly. Once the “Dial Time-out” timer expires, or the user presses the center
navigation button (Check Button” the call is sent to the
X-50
for processing. The user can also press a
preprogrammed telephone line button and dial the number directly.
One
ȱ
Touch
ȱ
Record
Also Known as Live Call Record - Extensions have the ability record the current conversation. One Touch record is
extremely helpful for remembering telephone numbers or addresses when a pen and paper are not readily
available. The recording is placed in the user’s personal mailbox so that they may listen at a more convenient
time. This feature works with local (LAN) and remote (WAN) authenticated
X2020
telephones.
This feature may violate privacy laws if used in a manner that is inconsistent with requirements of these laws.
Manufacturer assumes no responsibility with regard to the use of this feature. It is provided for the virtue of
ethical use only. The User is responsible for using this feature appropriately considering all applicable laws.
Paging
All Call Page
When doing an all call page, all LAN and WAN
X2020
telephones (within the same subnet) that are idle will
receive the page announcement.
Zone Page
Each extension can be placed into one or more paging zones. This allows specific areas to make a page
announcement without interrupting everyone on the system. When the page zone is dialed, all LAN and WAN
X2020
telephones (within the same subnet) that are idle will receive the page announcement.
Содержание X-50
