Xblitz RF400 CAM, Руководство пользователя

Страница: 40 / 94

40
09. AUDIO AND EQ SETTINGS
1. With short presses of the knob, pick the parameter you want to adjust:
BAS/TRE/BAL/FAD/EQ/LOUD/SUB/ST/BEEP/LOC. The values are set by turning
the knob. Pressing the knob confirms the change.
a. if no setting is changed, the device will automatically return to the previous
function after 3 seconds.
b. Turning the knob, by default, changes the volume.
c. Do not turn up low and high sounds too much when listening to loud music,
as it can cause sound distortions.
d. EQ function will overwrite the previous settings of low and high sounds.
Volume – volume settings (00-40).
Bass – low sounds settings (-7 … 0 … +7).
Treble – high sounds settings (-7 … 0 … +7).
Balance – balance between left and right channel settings (L10 … 0 … R10).
Fader – balance between front and back channel settings (R10 … 0 … F10).
Equalization – EQ settings (OFF/CLASSIC/ROCK/POP).
Loudness – sound alignment (LOUD OFF/LOUD ON). Human hearing is less sensit-
ive to sounds of high and low frequencies when the volume is low. Turning the
LOUD function on will make the EQ compensate for this at low volume. We recco-
mend you to turn that option o when the volume is high, as it can cause sound
distortions.
- For better sound quality, turn EQ o and set Bass and Treble settings to „0"
before turning this option on.
- The higher the volume, the less e ective automatic sound alignment is.
Stereo – turn receiving stereo waves by FM radio on/o .
BEEP – turn settings sounds on/o .
LOCAL – switch between local and long-distance radio waves receiving.
10. USING THE RADIO
After turning the device on, radio will activate automatically, if it was the last
mode used – or if the previously used USB/ SD drive has been disconnected.
If you want to switch to radio mode, press the MODE button and turn the knob.