Xblitz RF400 CAM, Руководство пользователя

Страница: 38 / 94

38
07. FUNCTIONS
A. TURNING ON AND OFF
1. Press the PWR button on the radio or button 1 on the remote to turn the device
on. On first startup, the device will turn on the RADIO mode by default.
2. On future startups, the device will turn on the last used mode, unless the used
external memory drive has been disconnected.
3. Due to voltage spikes when turning on engine startup, the device should be
turned on after the engine has already been turned on. it should also be turned o
before the engine is turned o . To turn o the device, press the PWR button on
the radio or button 1 on the remote.
B. RESETTING THE DEVICE
1. In case of the device losing power or not functioning properly, its microprocessor
needs to be restarted.. To reset the device, hold the RST button, found on the
radio under the volume knob, with a thin instument (e.g. a paperclip) for
3 seconds. The device will turn o and return to factory settings.
C. VOLUME
To set the volume, use the knob on the radio’s front panel or VOL+/ VOL- buttons
on the remote.
1. Due to many uses of the knob, if the device has any of the modes turned on
(other than the default), first you need to turn said mode o .
2. The volume level is visible in the upper right corner: VOL:00-40.
08. BASIC SETTINGS AND LANGUAGE
1. Press the MENU button and then turn the knob to choose settings and press
the knob to turn the settings on. The following parameters can be set:
menu language, date, time, factory settings, 12/24h time format,
place of use.
2. Choose the correct function by turning the knob. The modifications are made by
pressing the knob. After choosing the settings, you need to confirm them by turn-
ing the knob before pressing it again.