Xblitz EVERYWHERE, Руководство пользователя

Страница: 11 / 60

e) The blue light blinks – start Wi-Fi
f) Blue light on continuously – Wi-Fi connected
g) Yellow light blinks – battery low
06. RECHARGING
Use the original USB cable to connect the power source.
1. Charging in progress – the red light remains on.
2. When charging is complete, the red light turns off.
3. It takes about 3 hours to fully charge the device when it is turned off.
4. When fully charged, unplug the power source to prevent overcharging and
to preserve the battery life.
07. FUNCTIONS
1. ON/OFF. Press the power button for 3 seconds to turn on the device. The
green light indicates the power is on. Press the power button again for 3
seconds to turn off the device.
2. Memory Card Formatting: when the device starts up, it will beep 3 times
and cannot perform any operation – format the micro SD card by pressing
the record button for 5s. When the LED stops flashing and the device emits a
single beep, it means the formatting is completed and recording has started.
3. Recording: when green light is blinking, it means the recording is in progress,
and when green light is solid, it means the recording is paused.
4. Connect to computer: connect the device to your computer with a USB
cable. The computer will detect the portable hard drive. You can read and
transfer files. Do not disconnect the device while copying or playing files.
5. Connecting to an application: launch the cam application (see FIGURE D for
the application code) and click the Wi-Fi button to connect to the device,
select the network name „Xblitz Everywhere” and click connect, then enter
the password: „12345678”.
08. FAQ
1. The device can’t turn on.
The battery is low, please charge the device.
2. Why the computer cannot recognize the device?
The USB cable may be damaged, please check another USB cable.
3. The device does not work when a memory card (Micro SD) is inserted.
The device may not read the format of the card when it first starts. Please
format the card by holding down the record button.
4. Why do you have to wait sometimes before the recording starts?
You may have interrupted the recording of the last video by improperly
pulling out the card or directly turning off the device without pausing the