X7968r
User’s Guide
This does not perform an action – you will also be required to click on a button, menu entry
or link in order to proceed.
Help information
To view the help, click the desired menu or submenu. The related help information appears
in the right pane.
Testing your Setup
Once you have connected your hardware and configured your PCs, any computer on your
LAN should be able to use the device’s DSL connection to access the Internet.
To test the connection, turn on the device, wait for 30 seconds and then verify that the LEDs
are illuminated as follows:
LED
Behavior
Solid green to indicate that the device is turned on. If
this light is not on, check the power cable
attachment.
Encendido
Solid green to indicate that the Wireless LAN
function is operational.
WLAN
Solid green to indicate that the device can
communicate with your LAN.
LAN
Flashing on/off while trying to SYNC UP with ISP CO
site. Solid green to indicate that the device has
successfully established a connection with your ISP.
ADSL
PPP
On: There is a PPPoA or PPPoE connection.
Off: There is no PPPoA or PPPoE connection.
Table 1. LED Indicators
If the LEDs illuminate as expected, test your Internet connection from a LAN computer. To
do this, open your web browser, and type the URL of any external website (such as
).
If the LEDs do not illuminate as expected, you may need to configure your Internet access
settings using the information provided by your ISP. If the LEDs still do not illuminate as
expected or the web page is not displayed, see Troubleshooting section or contact your ISP
for assistance.
11
