AR396 User’s Guide
28
Global Setting
Enter
the
Filter Name
Select
the
Protocol
from the selection list.
Enter
the
Source IP Address
and
Subnet Mask (range of IP addresses)
of packet
Enter
the
one port or multi ports
(port range)
Enter
the
Destination IP Address
and
Subnet Mask (range of IP addresses)
of packet
Enter
the
one port or multi ports
(port range)
Click
Save/Apply
By default, all incoming IP packets from WAN are blocked to access PCs in LAN, but some IP
packets can be accepted by setting up filters.
Figure 35: Incoming IP Filter Setup
Click
Add
to add a rule of Incoming IP Filtering.
Check
Remove
and click
Remove
to remove the specified entry.
Figure 36: Add - Incoming IP Filter Setup
