Xavax 00111971, Инструкция по эксплуатации, Страница: 15 / 76

15
Offset
If the temperature in an area of the room differs from
the set temperature, you can perform a temperature
offset. Press
MENU
. Select the menu item
using the setting wheel. Confirm with
OK
.
The degree setting flashes on the display.
Now set the desired temperature offset (from -5 to
+5 °C) using the setting wheel. Press
OK
. The
temperature shown on the display does not change.
Window function
If you open a window, causing the temperature to
drop rapidly, the Wireless Radiator Controller/Timer
automatically closes the heating valve to save energy.
appears on the display. The Wireless Radiator
Controller/Timer resumes normal operation
afterwards. To set up this function, select .
Confirm with
OK
. First select the sensitivity using
the setting wheel ( = high sensitivity, > =
moderate sensitivity (default setting) > = low
sensitivity). Confirm with
OK
.
Now select the time (10 min (factory setting) - 60
min) for which the valve should remain closed.
Confirm with
OK
.
Holiday function
You can specify a set temperature for the time
you are away. The schedule you have set resumes
after the holiday period. Press
MENU
. Select the
menu item using the setting wheel. Confirm
with
OK
. (The case symbol appears on the
display.) Use the setting wheel to set the end time for
the holiday function = date for regular heating times
to resume). Confirm with
OK
. Then enter the time
and confirm with
OK
. flashes on the display.
Now set the temperature and confirm with
OK
.
appears on the display. You can deactivate the
function with
MENU
.
Child protection
You can lock the Wireless Radiator Controller/Timer
to prevent unauthorised operation. To do so, press
and hold
OK
+ simultaneously for approx.
2 sec. until the symbol flashes on the display.
Holding this combination again causes the symbol to
disappear and removes the lock.
Pause heating/close valve
Press
MENU
. Select the menu item using the
setting wheel. Confirm with
OK
. Use the setting
wheel to set the temperature on the display to
. The valve is now closed and operates without
a schedule. The once-weekly limescale prevention
function remains active. After the pause in heating,
switch to AUTO mode in the menu to resume the
schedule you have set.
All reset
Press
MENU
. Select the menu item using the
setting wheel. Confirm with
OK
. flashes;
confirm with
OK
.The Wireless Radiator
Controller/Timer is now in back to the state in which
it was delivered. Proceed as though you were starting
up the device for the first time.
The frost protection and limescale prevention
functions are automatically active:
Frost protection function
If the temperature falls below 6 °C, the Wireless
Radiator Controller/Timer opens the valve until the
temperature climbs above 8 °C. This prevents the
radiator from freezing.
Limescale prevention function
To prevent limescale from forming in the radiator
valves, the Wireless Radiator Controller/Timer
performs a limescale prevention run once per week
(Friday morning).