Xantrex XW4024-120, Руководство по эксплуатации

Страница: 61 / 112

Multi-Unit Config Menu
975-0240-01-01 3–23
Clear Delay time. Battery temperature is measured with a battery temperature
sensor. Do not use this setting if a battery temperature sensor is not installed. With
this setting, the auxiliary output can turn on a fan to cool the battery compartment.
Fault Activates the Auxiliary Output when a fault occurs. The Auxiliary Output
clears when the fault is cleared.
Multi-Unit Config Menu
The Multi-Unit Config menu configures the XW Inverter/Charger to operate as a
part of a multi-unit installation.
When installing a multi-unit system, each setting on the Multi-Unit Config menu
(except for “Dev Name”) must be configured for each XW Inverter/Charger in the
system. The Multi-Unit Config settings should be configured in the following
order:
• Dev Number
• Inverter Mode
• Connections.
Important:
Accessing this menu automatically places the XW Inverter/Charger in
Standby mode. When entering the Multi-Unit Config menu, the unit also identifies itself
by flashing all front panel lights. After exiting the Multi-Unit Config menu, the XW
Inverter/Charger returns to Operating mode and the front panel lights stop flashing.
Table 3-9 Multi-Unit Config menu
Item Description Default Range
Dev Name Allows customization of the default device name. This setting
is optional and does not affect operation. See “Setting the
Device Name” on page 3–24. n/a n/a
Dev Number Allows setting of a unique unit number in a multiple-unit
system. See “Setting the Device Number” on page 3–25. 00 00–31
Inverter Mode For a multi-unit system to operate, one XW Inverter/Charger
must be configured to “SplitPhMaster” and the rest as
“SplitPhSlave,” otherwise a system-wide fault is asserted.
Modes for single-phase models will be added to future product
releases. SplitPhMaster For split-phase
models:
SplitPhMaster,
SplitPhSlave
Connections Select to display the Connections menu. See “Connections
Menu” on page 3–26. n/a n/a