Xantrex XPower Inverter 3000, Руководство по установке

Страница: 20 / 62

Choosing an Appropriate Location and Mounting Orientation
20 Xantrex XPower 3000 Installation Guide
Chassis Ground Wire Sizing
Connect a minimum No. 8 AWG copper wire from the vehicle
chassis to the chassis ground terminal on the XPower inverter DC
panel.
OutputConductorSelectionforHardwire
Installation
The XPower inverter may be used by connecting cord-connected
loads to the receptacles on the front panel, and/or by connecting
loads or a load circuit to the AC output hardwire terminal block. If
making connections to the AC output hardwire terminal block, use
jacketed No. 10 AWG copper 2-wire plus ground cable.
Conductors may be solid or stranded.
Some installation codes require and we recommend use of oil-
resistant cable rated for damp or wet locations.
Color code for conductors:
n
Black = [L] ine (hot)
n
White = [N] eutral
n
Bare or green = [G] round