10
switching on the inverter with all AC products
switched off, then one by one switch each on, starting
with the high surge product first.
Using the DC cable with cigarette
lighter plug (300 W unit)
Due to the limitations of 12 V outlets in vehicles or
boats, the XPower inverter should only be used to
supply AC power to products that require 150 W
(about 1.3 A) or less. If your application requires more
than 150 W (but less than 240 W continuous) or has a
high start-up surge, see “Using the DC cable clips.”
1.
Attach the ring type connector marked with red to
the positive (+) DC terminal on the power
inverter, and attach the ring connector marked
with black to the negative (-) DC terminal.
CAUTION
A reverse polarity connection (positive to negative)
may damage the power inverter. Damage caused by
a reverse polarity connection is not covered under
warranty.
