Xantrex Xanbus System, Руководство пользователя

Страница: 23 / 50

97-0022-01-01 15
Xanbus-Enabled Device Configuration Using the SCP
System Status Screen
The System Status screen appears after the Startup screen. The System
Status
screen displays aggregated status information for the entire
power system
1
.
The
System Status
screen always features a
menu
arrow pointing to the
Enter
button. Pressing
Enter
displays the Select Device menu.
Select Device Menu
The Select Device menu displays a list of Xanbus-enabled devices in
the system, including the Accessories and the Xanbus System Control
Panel (SCP). The Select Device menu is where you can access the Setup
menus for each device in the system. The length of the
Select Device
menu depends on how many Xanbus-enabled devices are installed.
The
Select Device
menu also contains the
Clock
menu (where the time
and date are set) and the System Settings menu (where system-level
settings can be configured). The
System Settings
,
XSCP
, and
Clock
menus are always available from the Select Device menu, regardless of
the number of Xanbus-enabled devices installed.
To display the
Select Device
menu:
◆
From the
System Status
screen, press
Enter
.
Device Setup Menus
Device Setup menus display status information and changeable settings.
Changeable settings are identified by the square brackets [ ] around values
in the right-hand column.
To display the Setup menu for a device:
◆
On the
Select Device
menu, highlight the device name and press
Enter
.
1.As an example, a power system can have five Xanbus network-connected devices – up to
a maximum of two Freedom SW Inverter/Chargers, one Freedom Sequence power manager, one
Xanbus AGS module, and one Xanbus SCP all connected to a single battery bank, a single generator
and a common utility grid.
IMPORTANT:
If you are uncertain which Xanbus System Control Panel
(SCP) screen or menu you are viewing, you can always return to the
starting point—the
System Status
screen—by pressing
Func
until the
System Status screen appears.
Figure 9 Selecting a Device Setup Menu
Select Device menu
FSW Inverter/Charger
Setup menu
Select Device
System Settings
FSW3012 00
XSCP
Clock
FSW3012 00: Setup
Inverter
Search Mode
Charger
Force Chg
[Enabled]
[Disabled]
[Enabled]
FSW3012 00: Setup
Inverter
Search Mode
Charger
Force Chg
Equalize
Mode
Clear Faults/Warnings
View Device Info
Basic Settings [Enabled]
[Disabled]
[Enabled]
[Disabled]
[Operating]
To view Device Setup
menu, highlight the device
name and press
Enter
NOTE : The Xanbus System Control
Panel (SCP) displays only four lines
of the Setup menu at one time. To
view additional settings, press the
Down arrow button.
Complete Device
Setup menu list.