Xantrex SOLAR CHARGE CONTROLLER 30, Руководство пользователя

Страница: 3 / 40

IMPORTANT SAFETY
INFORMATION
READ AND SAVE THIS
O
WNER
’
S
G
UIDE FOR
FUTURE REFERENCE
.
Read these instructions carefully and look at the equipment to become
familiar with the device before installing, operating, configuring,
maintaining, and troubleshooting it. The following special messages
may appear throughout this documentation or on the equipment to
warn of potential hazards or to call attention to information that clarifies
or simplifies a procedure.
The addition of either symbol to a “Danger” or “Warning” safety label indicates
that an electrical hazard exists which will result in personal injury if the
instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible
injury or death.
AGM Absorbent Glass Mat lead-acid battery
BTS Battery Temperature Sensor
BMS Battery Management System
LCD Liquid Crystal Display
LFP, LiFePO
4
Lithium-ion Iron Phosphate
MPPT Maximum Power Point Tracking
PV Photovoltaic
SOC State-of-Charge
Table 1 Abbreviations and acronyms
975-1012-01-01 Rev B
Oct 2019
3