Basic Installation Steps
WARNING
HAZARD OF ELECTRIC SHOCK AND FIRE
n
User shall install a fuse that is 1.25 to 2 times the rated current
of the controller on the positive battery side with a distance
from the battery not greater than 150 mm.
n
Ensure that the "+" and "–" poles on both the battery and PV
are connected properly.
n
Intended for indoor dry locations only.
n
Do not charge a frozen battery.
n
Minimum charge ambient for Li-ion batteries is 0 °C (32 °F).
Failure to follow these instructions can result in death,
serious injury, or equipment damage
.
CAUTION
EQUIPMENT DAMAGE
Do not integrate this charge controller with a residential electrical
system.
Failure to follow these instructions can result in injury or
equipment damage.
1.
Prepare the tools for wall mounting and wiring installation.
• #2 Phillips screwdriver
• keyhole saw
• pencil
• power drill with bit set (see NOTE)
• other tools such as wire stripper, cutter, crimper, wrench
975-1012-01-01 Rev B
Oct 2019
19
Содержание SOLAR CHARGE CONTROLLER 30
Страница 1: ...Owner s Guide 30A PWM Charge Controller 709 3024 01...
Страница 38: ......
Страница 39: ...This page has no content...