manualshive.com logo in svg

Xantrex RS3000, Руководство по установке

Поделиться
Скачать
Xantrex RS3000 Скачать руководство пользователя страница 33

Installation

975-0171-01-01

17

Installing the Inverter/Charger

Overview

This section provides detailed information on installing the RS3000. The overall 
procedure is divided into eight steps:

Step 1: Choosing a Location for the Inverter/Charger

Step 2: Mounting the Inverter/Charger

Step 3: Connecting the AC Input and AC Output Wires

Step 4: Connecting the DC Cables

Step 5: Connecting the Battery Temperature Sensor (BTS)

Step 6: Connecting to the Network

Step 7: Performing Checks Prior to Initial Start-Up

Step 8: Testing Your Installation

Step 1: Choosing a Location for the Inverter/Charger

The location of the inverter/charger is a key factor in system performance.
Allow sufficient clearance around the unit (recommended minimum 3 inches 
(76 mm)) and install in a well-ventilated compartment to prevent overheating and 
premature shutdown of the inverter/charger.

The inverter should only be installed in a location that meets the following 
requirements:

WARNING: Risk of fire or explosion

This equipment contains components that could produce arcs or sparks. To reduce the risk 
of fire or explosion, do not install this equipment in compartments containing batteries or 
flammable materials, or in locations that require ignition-protected equipment. This 
includes any space containing gasoline-powered machinery, fuel tanks, or joints, fittings, 
or other connections between components of the fuel system.

WARNING: Fire hazard

Do not cover or obstruct the ventilation openings. Do not install this equipment in a 
compartment with limited airflow. Overheating may result.

Ventilated

Do not operate the inverter/charger in a closed-in area or restrict 
ventilation in any way. The inverter/charger requires air circulation 
to maintain optimum operating temperature and provide best 
performance. If the unit has inadequate ventilation, it may shut down 
due to overheating. 
The air vented through the openings should also have a path to 
circulate away from the inverter/charger.

Содержание RS3000



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды