background image

About Xantrex

Xantrex Technology Inc. is a world-leading supplier of advanced 
power electronics and controls with products from 50 watt mobile 
units to one MW utility-scale systems for wind, solar, batteries, fuel 
cells, microturbines, and backup power applications in both grid-
connected and stand-alone systems. Xantrex products include 
inverters, battery chargers, programmable power supplies, and 
variable speed drives that convert, supply, control, clean, and 
distribute electrical power.

Trademarks

XPower by Xantrex is a trademark of Xantrex International. 
Xantrex is a registered trademark of Xantrex International.
Other trademarks, registered trademarks, and product names are the 
property of their respective owners and are used herein for 
identification purposes only.

Notice of Copyright

XPower PowerSource Mobile 100 Owner’s Guide
© July 2006 Xantrex International. All rights reserved.

Exclusion for Documentation

U

NLESS

 

SPECIFICALLY

 

AGREED

 

TO

 

IN

 

WRITING

, X

ANTREX

 T

ECHNOLOGY

 I

NC

(“X

ANTREX

”)

(

A

)

MAKES

 

NO

 

WARRANTY

 

AS

 

TO

 

THE

 

ACCURACY

SUFFICIENCY

 

OR

 

SUITABILITY

 

OF

 

ANY

 

TECHNICAL

 

OR

 

OTHER

 

INFORMATION

 

PROVIDED

 

IN

 

ITS

 

MANUALS

 

OR

 

OTHER

 

DOCUMENTATION

.

XP_Powersource_Mobile_100.book  Page i  Wednesday, August 16, 2006  11:29 AM

Содержание PowerSource Mobile 100















































Отзывы: