6
Connecting with a Remote
You can force the PathMaker to Connect for five minutes for
emergency starting by momentarily pressing the Manual On switch
on the remote panel. You may cancel the forced connection only by
pressing the Manual On switch a second time (for less than one
second).
While in the forced Connect mode, placing the switch to the
Disabled position will break the connection. However, returning
the switch to the Auto position will allow the forced Connect to
resume until the five-minute timer expires or until the switch is again
placed over to the ON for at least one second to cancel the five-
minute timer.
Troubleshooting
The PathMaker is internally protected against most faults. If the Green
light does not come on when the switch on the unit is held in the ON
position, disconnect the wire connected to the system negative
terminal, wait one minute and reconnect it.
Содержание PathMaker
Страница 18: ...18...