manualshive.com logo in svg

Xantrex GRIB and Ethernet interface, Руководство по эксплуатации

Поделиться
Скачать
Xantrex GRIB and Ethernet interface Скачать руководство пользователя страница 37

Configuring the Device Using DeviceInstaller

M370078-06

2-13

2. Click 

Search 

to get a list of all the XG devices that can be reached 

from the network adaptor that you previously selected. If your XG 
unit (s) are powered up, they should appear in this list.

After a short delay, your power supply will be found. See
Figure 2-15. If the power supply is not found or the found device is 
not reachable, contact your network administrator for details about 
network settings.

3. If the IP address shown and the method that the XG unit is using to 

obtain this address is correct, stop here and exit/close this window. 
Otherwise, continue to step 4.

4. Expand the Local Area Connection tree; if necessary, expand further 

until the IP address of the XG unit is displayed. Then left click the IP 
address; the screen should display as shown in Figure 2-16.

Figure 2-15

Searching for Power Supply IP Address

Содержание GRIB and Ethernet interface







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды