manualshive.com logo in svg

Xantrex GRIB and Ethernet interface, Руководство по эксплуатации

Поделиться
Скачать
Xantrex GRIB and Ethernet interface Скачать руководство пользователя страница 35

Configuring the Device Using DeviceInstaller

M370078-06

2-11

Configuring the Device Using DeviceInstaller

The DeviceInstaller displays a list of the XG units with the ENET option 
that are on the network. When the DeviceInstaller initially starts, the 
device list is empty. Devices may be added by performing a search for the 
devices on the network or by adding them manually.

Selecting a Network Adapter

After the installation of DeviceInstaller to your PC, you must select which 
network adaptor you wish the DeviceInstaller to use for all its network 
communications. 

To select the network adaptor:

1. Start 

DeviceInstaller

 by clicking 

Start > All Programs > Lantronix 

> DeviceInstaller > DeviceInstaller

. 

2. If this is the first time you have started the program after installing it 

and there are more than one network adaptors on the PC, you might 
be prompted to select the network adaptor as seen in Figure 2-12. If 
this prompt does not appear, click 

Tools > Options...

 to bring up the 

Options window shown in Figure 2-13. 

3. Verify that the network adaptor that is connected to the network that 

you are running your XG unit (s) on, is selected.

4. Click the 

OK

 button.

Important:

Only network adaptors that are enabled and have an Ethernet 

cable connected will be shown in this list. If one of your networks adaptors is not 
shown in this list, verify that it is enabled and has a network cable connected to it.

Figure 2-12

Multiple Network Adapters

Содержание GRIB and Ethernet interface







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды