Xantrex Freedom SW Series, Руководство пользователя

Страница: 29 / 122

97-0019-01-01 15
Freedom SW Inverter/Charger Mechanical Features
Freedom SW Supplied Accessories
NOTE : If any of the supplied accessories are missing, contact
customer service or any authorized dealer for replacement.
Figure 7 Supplied Accessories
1
2
3
4
Item Description
1 Two DC terminal covers are supplied to prevent
accidental
contact with the DC cable connectors after installation.
The red cover is for the positive cabling terminal, and
the black cover is for the negative cabling terminal.
2 BTS , the Battery Temperature Sensor consists of:
Connector plugs into the BTS jack on the Freedom SW.
Sensor cable is 25 feet (7.6 meters).
Sensor can be mounted on the side of the battery case or
on the negative battery terminal.
NOTE : The BTS continuously measures the
temperature of the battery and adjusts the charger output
for a more accurate, temperature-compensated charge.
3 Two sets of nuts and washers are used to secure DC
cable ends to the DC terminals.
4 Two Xanbus network terminators are used to properly
terminate each of the two ends of the daisy-chained
Xanbus network. For example, if the Xanbus SCP is
connected to the inverter/charger, one terminator will be
plugged to the SCP, one network cable will connect both
devices, and one terminator will be plugged to the
inverter/charger.
IMPORTANT : The Xanbus SCP may perform
erratically if the Xanbus network is not properly
terminated.
FSW Owners Guide.book Page 15 Tuesday, August 7, 2018 9:03 AM