36
Freedom SW 3000 Installation Guide
Installing the Inverter/Charger
Step 6: Connecting to the Network
For your reference, Figure 12 shows where the network connections are
made on the Freedom SW 3000.
To connect the Freedom SW 3000 to the Xanbus network:
◆
Plug a network cable connected to the Xanbus network into either one
of the two network jacks on the Freedom SW 3000.
Detailed information on planning and installing your network is available in
the
Xanbus System Installation Guide.
Refer to the this guide to determine
the type of network layout to install, as well as guidelines for installing the
network.
The Xanbus System Installation Guide is available for download at
www. xantrex.com
EQUIPMENT DAMAGE
Connect the Freedom SW 3000 only to other Xanbus compatible devices.
Although the cabling and connectors used in this network system are the
same as Ethernet connectors,
this network is not an Ethernet system
.
Equipment damage may result from attempting to connect two different
systems.
Failure to follow these instructions can damage the unit and/or
damage other equipment.
Figure 12
Conne
c
ting to a Network Ja
c
k
FR
EE
DO
M
SW
30
00
In
v e
r t
er
Re
se
t
En
ab
le
In
v e
rt
er
A C
/
O
n
C h
a r
ge
Fa
ul
t
X a
nb
us
I
n t
e r
fa
ce
an
ufa
c
ture
FR
EE
DO
M
SW
30
00
