Xantrex Freedom HF Скачать руководство пользователя | Manualshive

Страница: 52 / 58

background image

Troubleshooting Reference

52

Freedom HF Owner's Guide

Problem

Possible Cause

Solution

No output voltage. The status LED is not
lighting up.

AC shore power is not available or out of
operating range and the inverter is OFF.

• Check AC shore power.
• Turn the inverter ON.

AC shore power is not available and the
inverter is OFF due to a shutdown for
more than 30 seconds.

• Check AC shore power and battery voltage.
• Turn the inverter ON and look at the display panel for any error
code.
• See

Error Code on page 46

.

The inverter’s DC input polarity is
reversed.

The inverter was probably damaged due to the reverse polarity.
This type of damage is NOT covered by the warranty.
• Return the unit.
• See Warranty online for information on returning the unit.

No output voltage. The status LED is not
lighting up.

The jumper wire on the power module
panel connecting the “Ignition Control”
and “Disabled” terminals is removed and
there is no ignition signal present.

Ensure the jumper wire is installed if the ignition control feature is
not in use. If the ignition control feature is in use, ensure the
vehicle’s ignition is on.

The fan turns on and off during AC shore
power mode.

• The battery is discharged and demands
high current from the charger.
• AC pass-through current is high.

Do not be alarmed, the unit is performing normally.

The fan turns on and off during inverter mode.

The inverter is running continuously at
high power.

Do not be alarmed, the unit is performing normally. The fan is
activated automatically.

Unexpected AC output overload condition
warning (

E06

) or shutdown (

E03

) even though

loads are within rated limits.

Unit is subjected to sudden extreme
vibration or constant moderate vibration.

In the case of a sudden extreme vibration, the unit will perform
normally when the vibration stops.
In the case of a constant moderate vibration, the unit may display a
warning or shutdown. In either case, you have to remove the unit
and place it near a more stable location not subject to constant
moderate vibration.

«
...
50
51
52
53
54
...
»

Содержание Freedom HF



























































Отзывы:

Нет отзывов

Похожие инструкции для Freedom HF

Бренд: Z3 Technology Страницы: 86

Бренд: Kelvix Страницы: 2

Бренд: OSEE Страницы: 46

DMX SPLITTER 8R

Бренд: GLG Страницы: 2

Бренд: DAB Страницы: 18

Digiwatts RN3000US

Бренд: Renovo Страницы: 54

Бренд: Patton electronics Страницы: 20

Бренд: DigiTech Страницы: 4

Бренд: GoMax Electronics Страницы: 16

Бренд: Phrontier Technologies Страницы: 16

HUBNER BERLIN AMG 11 FSL

Бренд: Baumer Страницы: 44

Бренд: M2TECH Страницы: 49

Бренд: Leader Electronics Corp. Страницы: 13

Бренд: Outback Power Systems Страницы: 88

Бренд: Uhlenbrock Elektronik Страницы: 4

Бренд: Proximus Страницы: 2

Бренд: LG Chem Страницы: 53

Бренд: Gree Страницы: 77

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды