Xantrex ACCB Скачать руководство пользователя страница 26

Страница: 26 / 66

Installation

1–14

975-0046-01-01

Mounting the

ACCB

to the Inverter

To install the

ACCB

on the inverter:

1. Mount the inverter into place, either wall-mounted or shelf-mounted,

and secure with appropriate lag bolts. See the Sine Wave Plus
Inverter/Charger Owner’s Manual for specific mounting instructions
for the inverter.

2. Line up the

ACCB

at the AC end of the inverter, so that the mounting

rails are aligned together and the ACCB base is as close to the
inverter as possible. The gap between the

ACCB

and the inverter

should be no more than 1/16 inch.

3. Secure the

ACCB

in place with six #10 wood screws of an

appropriate length (or lag bolts) in the six mounting and keyhole slots
on the mounting rails of the ACCB.

4. Leave the top cover off the ACCB to proceed with wire connections.

Important:

Ensure that the factory installed cables in the

ACCB

are not

pinched, crushed, removed, or damaged during the installation to the
inverter.

Figure 1-10

Installing the ACCB on the Sine Wave Plus Inverter Charger

Set Inverter

OFF SRCH ON CHG

Sine Wave Plus Inverter / Charger

ACCB Base
with top cover
removed

Mounting holes
and keyhole
slots for ACCB

Mounting Rails

Mounting holes
and keyhole
slots for ACCB

Sine Wave Plus Inverter/Charger

Содержание ACCB



































































Результаты поиска

Содержание ACCB

Отзывы:

Бренды по названию

Популярные бренды

Xantrex ACCB, Руководство пользователя

Результаты поиска

Содержание ACCB

Отзывы:

Бренды по названию

Популярные бренды