![Xantrex 880-0125-12 Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/xantrex/880-0125-12/880-0125-12_owners-manual_3164057003.webp)
Important Safety Information
READ AND SAVE THESE INSTRUCTIONS
Electrical equipment shall be installed, operated, serviced, and maintained only by qualified personnel.
Certain configuration tasks shall only be performed by qualified personnel in consultation with your local
utility and/or an authorized dealer. Servicing of batteries and the BMS shall only be performed or supervised
by qualified personnel with knowledge of lithium-ion batteries and their required precautions. Qualified
personnel have training, knowledge, and experience in:
• Installing electrical equipment
• Applying applicable installation codes
• Analyzing and reducing the hazards involved in performing electrical work
• Installing and configuring lithium-ion batteries
• Selecting and using Personal Protective Equipment (PPE)
No responsibility is assumed by Xantrex LLC for any consequences arising out of the use of this material.
DANGER
HAZARD OF FIRE, ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See
NFPA 70E or CSA Z462.
• Equipment must only be installed and serviced by qualified electrical personnel.
• In case of fire, use only a Class ABC type (dry chemical) fire extinguisher. Water can be a dangerous
extinguishing medium for energized equipment because of the risk of electrical shock.
• Always use a properly rated voltage sensing device to confirm all circuits are de-energized.
• Do not short-circuit the battery.
• Do not expose the battery to flames.
• Do not attempt to open or dismantle the lithium-ion battery. If the battery is damaged, do not touch the
corrosive electrolyte or powder. In case battery content comes in contact with skin or eyes, immediately
flush the affected area with large amount of clean water and seek medical help.
• Do not crush, puncture, or drop the battery.
• Do not install in environments where the ambient temperature exceeds 113°F (45°C).
Failure to follow these instructions will result in death or serious injury.
975-0824-01-01 Rev A
February 2020
3