Xantrex 815-3012-02, Руководство пользователя

Страница: 31 / 76

Basic Installation Procedures
975-1057-01-01 32
Step 2: Mounting the Unit
Considerations
Before mounting the Freedom SW-RVC, take the following two
factors into account.
The weight of the Freedom SW-RVC inverter/charger requires two
people to install it. Mounting considerations are shown in
Approved Mounting Orientations on page 33 .
CAUTION
PHYSICAL INJURY HAZARD
n
The Freedom SW-RVC is heavy (see Net Weight on page
72 ).
n
Do not lift the unit by yourself.
n
Use two people to lift and mount the unit.
n
Always use proper lifting techniques during installation to
prevent injury.
n
Make sure that the wall can support a load of up to 70 lbs (32
kg).
n
Do not install in plasterboard (drywall) using drywall anchors.
n
Attach the unit to wall studs. Use appropriately sized screws
depending on wall material and thickness.
Failure to follow these instructions can result in injury or
equipment damage.
The Freedom SW-RVC mounting orientations are shown in
Approved Mounting Orientations on page 33 .
Mount your inverter/charger before you connect any wires or
cables.
To mount the inverter/charger:
1. Remove the inverter/charger from its shipping container.
2. Verify that all components are present.
3. Select an appropriate mounting location and orientation. To
meet regulatory requirements, the Freedom SW-RVC must
be mounted in one of the orientations shown in
Figure 3 on
page 33 .
4. Mark the position of the mounting holes.
5. Pilot drill the six mounting holes.
6. Fasten the inverter/charger to the mounting surface with six
1/4" pan-head steel screws.