manualshive.com logo in svg

Xantrex 807-1055, Руководство пользователя

Поделиться
Скачать
Xantrex 807-1055 Скачать руководство пользователя страница 33

975-0727-01-01

19

Operating in Inverter Mode

The Freedom HFS is in inverter operation (operating in inverter 
mode) when all the following conditions exist:

•

inverter power button is ON 

•

inverter mode setting is ON 

•

shore power is not presently available 

•

battery has sufficient power 

Inverter operation means that DC battery power is presently being 
converted to utility grade AC power, powering equipment and 
appliances connected to the AC output terminal of the unit. 
The Yellow status LED lights up to indicate the Freedom HFS is 
using the battery to power the equipment and appliances.

Turning Inverter Operation ON and OFF

The Inverter Power button on the display panel turns the Freedom 
HFS’s inverter operation ON or OFF. 

◆

Press the button and hold for one second.

Turning the Inverter mode setting to OFF and/or turning the 
Inverter Power button off does not disconnect DC battery power 
from the Freedom HFS. You must disconnect both AC and DC 
power before working on any circuits connected to the unit.

To prevent unnecessary battery discharge, turn the Inverter Power 
button off when you are not using the Freedom HFS.

Power Save Feature

The Power Save feature is a 25-hour countdown that automatically 
shuts down inverter operation to reduce battery discharge and 
preserve battery life. During continuous inverter operation, a 25-
hour countdown is initiated when power from the AC load drops to 
less than approximately 50 watts and remains below this level. After 
25 hours the inverter automatically shuts down.
To enable this feature the inverter mode setting must be set to 
“



”. See “To change the inverter mode setting:” on page 12.

ELECTRICAL SHOCK HAZARD

Failure to follow these instructions can result in death or serious 
injury.

Freedom HFS IC Owners Guide.book  Page 19  Friday, September 11, 2015  2:54 PM

Содержание 807-1055



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды