Xantrex 806-1020, Руководство пользователя

Страница: 22 / 62

8 Freedom HF Owner’s Guide
Features
Remote and Power Module Panel
(
Freedom HF 1055 EMS,1800 EMS
)
For instructions on how to enable or disable Ignition Control, see the
Installation Guide.
Side Panel (All Models)
Feature Description
1 Remote jack is used for connecting the Display panel that ships with the
Freedom HF 1055 EMS and 1800 EMS. Each shipment comes with a 25-foot
communications cable as well.
2 Power module has one fuse and three contacts for wires that connect to:
• an auxiliary 12-volt DC OUT terminal,
• an Ignition Control terminal, and
• a Disabled terminal.
NOTE : The Ignition Control and Disabled terminals are connected
by a jumper wire that acts to disable ignition control. Removing the
jumper wire will enable ignition control.
2
1
Feature Description
1 15 A supplementary protector provides overload protection for the GFCI
receptacles. In a hard wired installation, the supplementary protector does not
protect output wiring. However, for models Freedom HF 1055 (PNs: 806-
1054, 806-1054-01), Freedom HF 1500 (PN: 806-1544), and Freedom HF
1800 T (PN: 806-1840-01, 806-1840-03, 806-1840-04), the hard-wired AC
output connector is protected by both the 15 A supplementary protector and
the GFCI.
2 Grounding stud provides a ground path for the Freedom HF chassis to the
DC system ground.
3 Main cooling fan turns on when powering loads above 500 watts or when the
internal temperature reaches a set point temperature.
4 Auxiliary cooling fan (1800-watt models only) performs the same function
as the main cooling fan.
1
2
4
3
Freedom HF InvChg Owners Guide.book Page 8 Wednesday, September 13, 2017 6:20 PM