Figure 6 Connecting ring terminals
e.
If you are using the supplied adapter battery cable with
ring terminals, prepare the tools specified under
.
l
attach the red pos (+) ring terminal to the pos (+)
battery terminal and secure with a battery terminal
nut (not supplied)
l
attach the black neg (–) ring terminal to the neg (–)
battery terminal and secure with a battery terminal
nut (not supplied)
NOTE
: See
NOTICE
regarding reverse polarity.
5.
Attach the connector of the extension cable to the connector of the adapter battery cable. The connector is
designed to maintain the correct connection polarity.
Figure 7 Connecting the SAE connectors
NOTE
: Do not use the SAE reverse-polarity Adapter Connector as shown.
6.
Unfold the portable kit and position the portable kit in a safe, well lit, and unobstructed area for maximum sun
exposure. The placement location must be free from walk-ways and other potential trip hazards.
a.
Use the built-in support legs to prop up the solar panel in place. Alternatively, you may lay the solar
panel flat on any surface. See
CAUTION
regarding personal injury or property damage.
b.
Point the solar panel surface towards direct sunlight and manually adjust accordingly as sunlight
moves about during the day.
16
975-0809-01-01 Rev D
Dec 2019
Содержание 783-0100-01
Страница 8: ...This page is intentionally blank...
Страница 23: ...This page has no content...