background image

 

1 of 3 

INSTALLATION INSTRUCTIONS 

 

MODEL RS422232 

Bi-Directional RS422/RS232 Converter 

 
 

 

Figure 1 – RS422232 Converter 

 
 

INTRODUCTION 

RS232 is an 

un-balanced

 serial data format allowing for transmission lengths up to 100ft. This 

distance specification limits the use of this format when used in residential and commercial 
automation control system applications. RS422 is a 

balanced 

serial data format with a distance 

specification of up to 4000ft allowing for a more flexible automation control system configurations. 
Xantech’s 

RS422232

 

Converter

 is a bi-directional serial converter, converting between these two 

formats, in-turn, increasing the maximum distance RS232 devices can be used in.  
 
This product serves two main functions: 

1.  Convert standard Serial RS232 signals to a balanced RS422 line allowing for increased 

transmission lengths in upwards of 4000ft over a single CAT5 cable. 

2.  Companion accessory to the SmartPad LCD™ Touch Screen Panels Serial RS422 

output, allowing the SPLCD to control a multitude of RS232 devices in remote locations. 

 
 
 

FEATURES / SPECIFICTIONS 

 

• 

RS232 I/O Connection

: Connects to RS232 Devices via a standard DB9 connection wired to standard 

PC Serial Port Specifications. 

• 

RS422 I/O Connection:

 Standard RJ45 connection. 

• 

RS422 Wiring:

 

CAT5 or higher up to 4000ft (under ideal wiring conditions) wired to the 
ETIA/TIA 568B standard. 

• 

RS232 Wiring:

 

Standard Serial DB9 cable up to 100ft (under ideal wiring conditions). 

Note: 

Since the RS422232 converter allows RS232 to be run over long distances, it is recommended 

that the unit be placed as close to the RS232 device as possible.

 

 

• 

Data Tx/Rx LED: 

Green LED indicating Data is being transmitted through both data ports.

 

• 

Power Requirement: 

Regulated 12VDC Power is required. (Xantech 781RG Power supply included) 

• 

Power Connection:

 

2.1mm Coaxial Plug (Center Pin=12VDC;  Sleeve=Chassis GND) 

• 

Power Indicator LED: 

Red LED indicating presence of 12VDC power. 

• 

Current Rating: 

75mA @12VDC 

 

 
 

Отзывы: