ISM4 INSTALLATION & PROGRAMMING MANUAL
32
NEXT
Not used in this
IR Learn Mode.
PREV
If not save of any learned IR is desired, p
ress to return to
Edit Mode
.
Delay Program Mode
Press the Front Panel Buttons and observe the LED’s to program Delays in Command Structures as follows:
NOTE:
Upon entering
Delay Edit Mode, the
Delay Value is reset to
0 seconds.
Figure 12 Front Panel Navigation – Delay Program Mode
DELAY
Not used in this
Delay Program Mode.
NEXT
In
Delay Program Mode
each press will
increase
the amount of
delay
by
one second
from
0-60
seconds
. After
60 seconds
a press of the
Next Button
will set the delay to
0 seconds
.
PREV
In
Delay Program Mode
each press will
decrease
the amount of
delay
by
one second
from
0 to
60 and down to 0 second
. After
0 seconds
a press of the
Prev Button
will set the delay to
60
seconds
.
TEST
After a
delay
duration has been selected, but
not saved
, a press of the
Test Button
will initiate the
delay
. The currently selected
Source LED
will
flash
the number of times equal to the duration of
the delay.
DELETE
Press to
remove
delay
value in the currently selected
Command Structure
.
SEQUENCE
Press to
save
a
delay
to a
Command Structure
. This action will automatically exit IR Learn Mode
and enter Edit Mode. Recall that full navigation on a Command Structure and Macro level is
permissible in Edit Mode.