2
ADVANCED MULTIROOM SYSTEMS
Fig. 4
illustrates an advanced system using a variety of connection and control techniques typical of
complex multiroom installations. It is configured as follows:
1. Both INJ94 Injectors and CPL10 Couplers are used in the remote rooms with various Xantech IR
Receivers.
As a rule of thumb, use the CPL10 with the CB12 Connecting Block when using Xantech 3-terminal
IR receivers or keypads, such as the 480-00 Dinky Link, 730-00 Smart Pad, etc. Use the INJ94 when
using Xantech IR receivers equipped with a 3.5mm quick-connect stereo mini plug, such as the 291-
00 Hidden Link and the 490-30 Micro Link.
2. Each IR receiver must be locally powered by a 781RG Power Supply as shown.
3. IR RCVR jack connections for the INJ94.Should you wish to make your own
custom connections to a mating 3.5mm stereo mini plug for this jack, follow the
terminal identifications given in the table,
Fig.5
.
4. Note that model 203-00 DC Blockers are used on the two coax leads going to
the two TV sets in the rooms
not
having IR receivers. This is a
must
to prevent
the RF inputs on the two TV sets from "shorting out" the IR control signal.
5. If an RF amplifier(s) is used anywhere in the line of coaxial cable between the CPL94B Coupler and
the INJ94 or CPL10 Injectors, you
must
use a Xantech BYPASS94 KIT to route the IR control signals
around the amplifier(s).
Where possible, place RF amplifiers ahead of the CPL94B Coupler, as shown in
Fig. 4
, instead of
using a bypass kit.
6.
Fig. 4
shows four components being controlled using two 286-00 dual emitters. This is the maximum
number of components controllable with the CPL94B. If you wish to control more, use the CPL10
Fig. 3
A Typical 3-Room System
MAIN ROOM
RF IN
OUT TO TV
RF IN
OUT TO TV
TV SIGNAL PATH
IR REMOTE CONTROL PATH
Hand Held
Remote
REMOTE ROOM 2
RF IN
2ND
TV
Hand Held
Remote
REMOTE ROOM 1
RF IN
3RD
TV
Satellite Dish
286M
Dual Blink-IR™
Mouse Emitter Assembly
Coaxial Cable
Place emitters on
the IR sensor
window on
front
panel
of each
controlled unit.
Emitter
SATELLITE
RECEIVER
(Back Panel)
VCR
(Back Panel)
Emitter
IR Sensor Windows
(Front Panel)
Coaxial Cable
Coaxial Cable
Coaxial Cable
Coaxial Cable
Room-to-Room Coaxial Cables
200-00
2-Way RF Splitter
DC Passing
Coaxial Cable
To 120 V AC
(unswitched)
291-00
IR RECEIVER
Coaxial Cable
INJ94
INJECTOR
781RG
Power Supply
Local
TV
RF IN
Coaxial
Cable
CPL94B
COUPLER
(included)
200-00
2-Way
RF Splitter
Spare jack
for additional
emitter(s),
if needed.
+12 V
IR
RCVR
TV
INPUT
INJ94 INJECTOR
+12 V
IR
RCVR
TV
INPUT
INJ94 INJECTOR
EMITTER
REMOTE TV
SAT/VCR
CPL94B COUPLER
EMITTER
IN
OUT
OUT
I N
OUT
OUT
To 120 V AC
(unswitched)
781RG
Power Supply
291-00
IR RECEIVER
INJ94
INJECTOR
CIRCUIT ITEM
GROUND
SIGNAL
+ 12 V
PLUG
RING
TIP
SLEEVE
Fig.5
INJ94/CPL94