-
16
-
4. Settings & Operation
DIP Switch Settings
There is a single DIP switch on the front that must be set prior to operation for:
•
MASTER/SLAVE
•
UNIT
ID
•
KEYPAD
PAIRING
MASTER/SLAVE
The D5SH4 can be selected as a master or slave unit. This configuration is reserved for future
upgrades. Default setting is ‘OFF’
MASTER
SLAVE
SWITCH 1
ON
OFF
UNIT ID (HUB NUMBER)
Each D5SH4 has a corresponding DIP switch setting relative to the other chassis.
To set UNIT ID DIP switches:
1. Correctly identify which chassis controls the associated zones.
2. Assign a unique unit ID based on the silkscreen on the rear panel.
3. Repeat this process for the each other expansion chassis.
UNIT ID
1
2
3
4
5
6
7
SWITCH
2
OFF OFF OFF OFF ON ON ON
SWITCH
3
OFF OFF ON ON OFF ON ON
SWITCH
4
OFF ON OFF ON OFF OFF ON
KEYPAD PAIRING
The KEYPAD PAIRING DIP switches allow each of the zones to be paired or grouped with any other
zone. Any zone that is in the UP position will be paired with any other zone that is also placed in the
UP position. This feature is useful to create large “party” zones where combined areas of the house
share audio and system control.
DEFAULT
PAIRED
SWITCH 5
OFF
ON
SWITCH 6
OFF
ON
SWITCH 7
OFF
ON
SWITCH 8
OFF
ON
