-
11
-
3. Connections
D5IP Source Input Wall Plate
A D5IP Source Input Wall Plate is required to add a Source to the Digital Distribution Hub. A run of
CAT-5 terminated to T-568A standard (see Figure 2.1) is required between the D5SH Digital Audio
Distribution Hub and the location designated for the D5IP. Connections between a source component
and the D5IP are detailed in Figure 3.1 to Figure 3.2.
NOTE:
(1) Set RCA/OPT/COAX switch to RCA (up) position when using Analog Left and Right
connections.
(2) Set RCA/OPT/COAX switch to OPT (middle) position when using Digital Audio connections
with optical cables.
(3) Set RCA/OPT/COAX switch to COAX (down) position when using Digital Audio connections
with coaxial cables.
