32
Tray X Unsuitable Size
The paper in tray X is not a size that can
be fed through the tray.
What to do—
Replace the paper in the
tray with an appropriate size.
Fuser Missing
Appears on the second line of the display
to indicate that the fuser is not installed
properly.
What to do—
Open the top cover. Then,
press down on the fuser to be sure it is firmly
in place.
If the message still appears, push
the blue release latches at either end
of the fuser (between the fuser and
the sides of the printer) toward the
open cover and lift the fuser out.
Then, lower it back into the printer,
pushing down firmly. You should
feel the latches at either end engage.
Toner Sensor Error
Appears on the second line of the display
to indicate that there is a problem with the
color XXX toner sensor.
What to do—
Turn the printer off, then on
again. If this does not clear the message, try
doing it again. If the message still persists,
call XANTÉ Technical Support at 1-800-
926-8393.
E
RROR
M
ESSAGES
(
CONTINUED
)
Disk File System is Full
The printer’s internal hard disk drive
does not have enough memory to print the
current document.
What to do—
Print out or delete some of
the files on the printer’s hard drive.
You also can use XANTÉ Storage
Device Manager to print/delete files
from the printer’s hard disk drive.
Press Online SW Invalid Data
The hard disk drive is not available and
job spooling cannot take place.
What to do—
Press ON LINE.
Содержание CL30
Страница 1: ...100 100612...