________________________________________________________________
Repacking Procedure 3
If you have a toner vacuum, use it to remove all loose toner in the printer before shipping it.
Removing Cables, Cassette(s), and Media
1.
Turn off the power to the printer, and if a 2,000 sheet feeder is attached, turn off the power to it.
2.
Disconnect the printer power cord and all attached interface cables. If a 2,000 sheet feeder is
attached, disconnect its power cord.
3.
Remove any paper cassettes in the printer. Remove any loaded media, including that in the printer
or in an optional feeder. Store the media according to guidelines in your printer user’s guide.
Removing Toner Cartridges
1.
Squeeze the latch on the top cover to release the lock (fig. 1); then, lift the top cover (fig. 2). The
multipurpose feeder opens automatically as you open the top cover.
Caution:
Do not touch any parts inside the printer.
Fig. 1 Release the Top Cover Latch
Fig. 2 Open the Top Cover
2.
Remove the toner cartridge by grasping its handles and pulling it slowly out of the printer (fig. 3).
Caution:
Once you begin pulling the cartridge out of the printer, remove it completely. The
cartridge’s shutter may not open properly if the cartridge is pulled partially out and then
pushed back in the printer.
Fig. 3 Remove the Toner Cartridge
